How to Upgrade Install to Windows 7 Build 6956 with VHD Image in Clean State如何升级安装到Windows 7日建立6956图像与英文说明国家清洁

People who has complete the downloading process for人们谁拥有完整的下载程序 Windows 7 Build 6956 VHD virtual hard disk image 7日建立的Windows 6956英文说明虚拟硬盘图像 will face a critical stop error issue, that the VHD cannot be loaded, started or booted up.将面临一个关键停止错误的问题，即英文说明无法加载，启动或启动了。 As the VHD is imaged from an actual physical computer, the hardware specification, hard disk drives (especially on SATA, ACHI and boot sequence settings) and drivers installed can be totally different and not compatible, causing users who attempt to use the VHD has the system partition to boot Windows 7 6.1.6956 encounter boot device error or BSoD.正如英文说明是图像从实际计算机的硬件规格，硬盘驱动器（特别是对的SATA ，阿智和启动顺序设置）和驱动程序安装可完全不同和不兼容，造成用户谁试图使用英文说明的系统分区启动Windows 7日6.1.6956遇到开机装置错误或BSoD 。

For example, the following error message may appears if users attempt to mount the VHD to a virtual machine to load or start the VHD:例如，下面的错误讯息可能会出现如果用户试图安装英文说明，以一个虚拟机加载或启动英文说明：

Reboot and Select proper Boot device重新启动，并选择适当的开机装置
or Insert Boot Media in selected Boot device或插入启动媒体在选定的开机装置

A disk read error occured磁盘读取错误发生
Press Ctrl+Alt+Del to restart按Ctrl + Alt +德尔重新启动

As such, a workaround hack has to be used in order to mount the Windows 7 Beta Build 6956, a possible actual beta candidate.因此，一种替代黑客已被用来以安装的Windows 7测试版生成6956 ，一个可能的实际测试的候选人。 In fact, the workarounds is actually the steps to install Windows 7 Build 6956 from the VHD image.事实上，实际上是替代的步骤来安装Windows 7日建设从6956英文说明的图片。 The installation can be done onto a actual physical machine, or a virtual machine powered by Virtual PC, Virtual Server, Virtual Box, VMWare, Hyper-V and etc.安装可以做到到实际机器，或一个虚拟机采用了虚拟PC ，虚拟服务器，虚拟保险箱，虚拟，超五和等

There are plenty of methods to install Windows 7 build 6956 into your PC, but the concept is essentially the same: User will need to copy the Windows 7 system files from the VHD to a partition that he or she wants the Windows 7 build 6956 to run, and then make sure the boot sector is OK, and if required, to reset the Windows 7 to clean original state.有很多方法来安装Windows 7日建立6956到PC ，但这一概念基本上是相同的：用户将需要复制的Windows 7系统文件从英文说明，以一个分区，他或她想在Windows 7日至建立6956运行，然后确定启动扇区的确定，如果需要的话，重置的Windows 7日至干净的原始状态。 Thus the steps detailed below is just for a guide, and the actual implementation may vary according to your own need, or the tool that you have.因此，下面详细列出的步骤只是一个指导，实际执行可能会有所不同根据自己的需要，或工具，你有。 All methods below is for ‘upgrade installing’ (not exactly upgrade, as existing data will be lost) existing partition with Windows 7 build 6801 to build 6956, but it may also works for new partition, harddisk or machine.下面所有的方法是'升级安装（不完全升级，现有的数据将丢失）现有分区与Windows 7日建立6801建立6956 ，但也可能适用于新的分区，硬盘或机器。

Tools (depending on method you used, not all may be required): 工具 （取决于您所使用的方法，并非所有可能需要） ：

Windows 7 Build 6801 7日建立的Windows 6801 : Last known Windows 7 pre-beta build that has properly installation DVD image. ：上次已知的Windows七日前测试建立了适当的安装DVD画面。 All methods below require an existing installation of Windows 7 build 6801.下面所有的方法需要一个现有安装的Windows 7日建立6801 。
WinMount : An utility to attach or mount supported files as a newly created virtual drive. ：一种实用工具，或安装附加的支持文件作为一个新成立的虚拟驱动器。
Norton Ghost诺顿魅影 : An utility to backup computer with system restore technology. ：一种实用工具来备份电脑系统恢复技术。
Acronis True Image Acronis真实形象 : A backup and recovery software ( ：一个备份和恢复软件（ Free Acronis True Image 8.0免费Acronis真实形象8.0 , or alternative ，或替代 free Seagate DiscWizard or Maxtor MaxBlast免费希捷DiscWizard或迈拓MaxBlast ). ） 。
O&O奥美广告公司ö

Method 1 : 方法1 ：

1. Mount or attach the VHD in Windows 7 (have to download and install Windows 7 build 6801 for this purpose) Disk Management, or with WinMount in non-Windows 7 system such as Windows Server 2003, Windows Vista and Windows XP.山或附加英文说明在Windows 7 （必须下载并安装Windows 7日建立6801为此）磁盘管理，或WinMount在非Windows 7系统，如Windows Server 2003中， Windows Vista和Windows XP 。
2. A new drive should be created from the VHD image mounted.一个新的驱动器应该建立从英文说明的形象展开。
3. Copy and paste ALL files in the VHD drive to another partition or drive.复制并粘贴中的所有文件的英文说明驱动器到另一个分区或驱动器。
4. Restart the computer and boot into another operating system such as Windows XP, Windows Vista or WinPE.重新启动电脑，并启动到其他操作系统如Windows XP ， Windows Vista或的WinPE 。
5. Format the Windows 7 build 6801 partition.格式的Windows 7日建立6801分区。
6. Copy the Windows 7 build 6956 over to formatted Windows 7 build 6801 partition.复制的Windows 7日建立6956到格式化的Windows 7日建立6801分区。

Note: It’s possible for users to format the existing Windows 7 build 6801 partition first, boot into WinPE with WinMount or another operating system, and the copy over the new 6956 build files to the formatted partition.注：这有可能为用户格式现有的Windows 7日建立6801分区第一，开机进入的WinPE与WinMount或其他作业系统，并复制了6956建立新的文件格式的分区。

If this method doesn’t work properly (as hardlinks, symbolic links and junction points may not be copied over), or has error message saying files in used or cannot copy over, try the following method.如果此方法不能正常工作（如hardlinks ，象征性的联系和连接点不得复制） ，或有错误讯息说档案使用或不能复制了，请尝试以下方法。

Method 2 : 方法2 ：

1. Mount or attach the VHD in Windows 7 (have to download and install Windows 7 build 6801 for this purpose) Disk Management, or with WinMount in non-Windows 7 system such as Windows Server 2003, Windows Vista and Windows XP.山或附加英文说明在Windows 7 （必须下载并安装Windows 7日建立6801为此）磁盘管理，或WinMount在非Windows 7系统，如Windows Server 2003中， Windows Vista和Windows XP 。
2. A new drive should be created from the VHD image attached.一个新的驱动器应该建立在附上英文说明的形象。 For users using WinMount, it’s usually labeled as Z drive letter.对于用户使用WinMount ，它通常标示为ž磁碟机代号。
3. Download and install Norton Ghost from Symantec, Acronis True Image (note that both software is not free), or下载并安装的Norton Ghost来自赛门铁克， Acronis真实映像（请注意，这两个软件是不是免费的） ，或 O&O DiskImage (free license)奥美广告公司ö DiskImage （无执照） . 。
4. Make a full backup of the Windows 7 build 6956 (in attached VHD) with Norton Ghost (.v2i) or Acronis True Image.完整备份的Windows 7日建立6956 （附英文说明中）与诺顿魅影系统（ 。 v2i ）或Acronis真实形象。 Save the backup file at a third-party not affected drive or partition.保存备份文件在第三方不影响驱动器或分区。
5. Restore the backup of Windows 7 build 6956 from the VHD to existing Windows 7 build 6801 volume.还原备份的Windows 7日建立6956从英文说明，以现有的Windows 7日建立6801卷。

   An alternative method for users running Windows 7 as system boot drive is to boot with Norton Ghost or Acronis True Image recovery startup CD, and then initiate computer recovery process to restore the backup to a drive or partition.另一种方法，用户运行的是Windows 7系统启动驱动器是启动的Norton Ghost或Acronis真实图像恢复启动CD ，然后开始恢复过程的计算机还原备份到驱动器或分区。

Update : 更新：

These methods now become informational, as the这些方法现已成为信息，如 setup installation ISO (DVD image) for Windows 7 build 6956设置安装国际标准化组织（ DVD画面）的Windows 7日建立6956 has been created and available for free download.已经建立并提供免费下载。

Troubleshooting : 故障排除：

After performing steps above, and upon system restart to boot into new Windows 7 build 6956, a Windows Boot Manager error may appear.在执行上述步骤，并呼吁重新启动系统启动到新的Windows 7日建立6956 ，在Windows启动管理器可能会出现错误。 In this case, boot the system with Windows 7 build 6801 DVD, and then perform a Startup Repair.在这种情况下，启动系统与Windows 7日建立6801的DVD ，然后执行启动修复。 In most cases, Windows RE (Recovery Environment) will automatically detects an error once user clicks on “Repair your computer”, and fix the boot sector and MBR accordingly.在大多数情况下， Windows稀土（修复环境）将自动检测错误一旦用户点击“修复计算机” ，并修复引导扇区和相应的膜生物反应器。

On startup, if the loading stuck or stopped while loading classpnp.sys (or to small extent fvevol.sys), or simply displays the infamous BSoD (Blue Screen of Death), the problem is probably due to ACHI support.在启动时，如果遇到问题或装货，同时停装classpnp.sys （或小范围fvevol.sys ） ，或只是显示了臭名昭著的BSoD （蓝屏死机） ，这个问题可能是因为阿智的支持。 To resolve the issue, restart the computer and go to BIOS, and then change the setting from ACHI mode to IDE mode.为了解决这个问题，重新启动计算机并进入BIOS的，然后更改设置阿智模式的IDE模式。 Users can re-enable the ACHI after performing the generalization process below.用户可以重新启用阿智表演后推广过程如下。

Note: For users using virtual machine such as VPC 2007 who fails with above error, try another virtualization software such as VirtualBox.注意：对于用户使用虚拟机，如2007年谁VPC失败，上述错误，尝试使用其他虚拟化软件，如VirtualBox 。

Windows 7 New Boot Screen : 7个新的Windows开机画面 ：

If for some reason you can see the new boot screen of Windows 7 build 6956 after perform the generalization step using System Preparation Utility (SysPrep) below, then download the如果由于某种原因，你可以看到新的开机画面的Windows 7日建立后，执行6956推广使用步骤系统准备工具（ Sysprep的） ，然后下载 W7-BootScreen.rar 7丁目， BootScreen.rar , which contains original BCD and BCD.rcbak files from build version 6956 of Windows 7. ，其中包含原始的BCD和BCD.rcbak建立档案6956版的Windows 7 。 Users can boot up with WinPE to overwrite the same files in C:\Boot directory, or using command prompt to do so.用户可以启动的WinPE了覆盖相同的文件在C ： \启动目录，或使用命令提示符这样做。

Reset Windows 7 Build 6956 to Original Default State : 复位的Windows 7日建立6956至最初的默认状态：

As the VHD is actually a running copy of Windows 7 installation on another machine, so some settings or components such as personalization, drivers support, features support, hardware specifications (such as ACHI) support and activation grace period has been changed or modified.正如英文说明实际上是一个运行的Windows副本7安装在另一台机器，所以有些设置或部件，如个性化，司机的支持，功能支持，硬件规格（如阿希）支助和激活的宽限期已变更或修改。 In order to restore and reset Windows 7 installation back to its original out-of-the-box experience (OOBE) state, users can run the SysPrep command.为了恢复和重新安装的Windows 7日回到了其原来的盒经验（ OOBE ）状态，用户可以运行Sysprep命令。 The command is located in C:\Windows\System32\sysprep\sysprep.exe .该命令是位于 C ： \ 的Windows \ System32 \的Sysprep \ Sysprep.exe会 。

IMPORTANT : This is a machine translated page which is provided "as is" without warranty. 重要说明：这是一台机器翻译网页这是“原样”提供，无保修。 Machine translation may be difficult to understand.机器翻译可能很难理解。 Please refer to请参阅 original English article英文原文的文章 whenever possible.只要有可能。

Share and contribute or get technical support and help at共享和贡献或获得技术支持和帮助 My Digital Life Forums 我的数字生活论坛 . 。

Related Articles相关文章

• Unable to Clean Install Windows Vista with Upgrade Edition Product Key无法干净安装Windows Vista的升级版产品密钥
• Hack and Workaround to Clean or Fresh Install Windows Vista with Upgrade License DVD哈克和变通清洁或全新安装的Windows Vista与升级授权的DVD
• Guide to Upgrade or Install Windows Vista SP1 RC 1 Build 6001.17052 (v.668) Online指南升级或安装Windows Vista SP1的钢筋混凝土一日建设6001.17052 （ v.668 ）在线
• Delete and Reset Windows Vista Folder Views or Folder Types Settings to Default Clean State删除和重置Windows Vista的文件夹视图或文件夹类型设置为默认清洁状态
• Trick to Buy and Install Full Retail Windows Vista at Upgrade Price Even Without Existing Old Windows CD诱骗购买和安装完整零售Windows Vista的升级价格即使没有现有的旧的Windows CD
• Download Windows 7 Build 6956 VHD Image via BT Torrent (Possibly Beta)下载Windows 7日建立6956英文说明图像通过电信山洪（可能是试用版）
• Download Windows 7 Pre-Beta Build 6956 Setup Installation DVD ISO Image (Torrent)下载Windows七日前建立6956试用版安装程序安装的DVD ISO映像（激流）
• Official Registry Hack Script to Install Windows Server 2008 and Vista SP2 Beta Build 16497 (CPP) via Windows Update哈克正式登录脚本安装Windows Server 2008年和Vista SP2的测试一六四九七建设（人民党）通过Windows更新
• Hack to Install Windows 7 Build 6956 Directly from VHD File哈克安装Windows 7日建立6956直接从英文说明文件
• Windows Vista Anytime Upgrade - How to Upgrade Edition Guide and Price Windows Vista的随时升级-如何升级版指南及价格

This entry was posted on Saturday, December 6th, 2008 at 3:56 pm and is filed under 本条目被张贴在周六， 2008年12月六日在下午3点56分，并提交下 Operating Systems 作业系统 . 。 You can follow any responses to this entry through the 您可以按照任何反应，这个项目通过 RSS 2.0 2.0 feed. You can 饲料。您可以 leave a response 留下一个反应 , or 或 trackback 引用 from your own site. 从您自己的网站。