Comprehensive List of How (Key to Press) to Access BIOS for Various OEM and Computer Systems

BIOS (Basic Input/Output System) is a firmware code that run by an PC when first powered on to identify and initiate component hardware (such as hard disk, floppy and optical disk drives), and then run bootstrapping or booting up process to load or execute and let operating system taking control of the computer machine.

Most OEM PC or custom-built clone PC using third-party motherboard (MOBO) allows user to configure various settings in BIOS (CMOS setup) to enter BIOS Setup or Configuration Utility in order to enable or disable devices or ports available, and more commonly, boot device priority or sequence. Some advanced settings also allow user to tweak computer performance, such as CPU clock speed multiplier and CPU front side bus (FSB) rate for overclocking, chipset features, DRAM parity, speed and timing, etc.

To access BIOS configuration screen, user need to press and invoke a specific hotkey or keys combination during the initial BIOS load screen (usually right after the computer is powered on). Here’s a list of the ways and access keys to press to access BIOS Setup Utility on variety of popular OEM computer systems, motherboard makers and major BIOS brands. Note that some BIOS or computer systems may have more than one method of accessing BIOS depending on when the BIOS is released.

Acer (Aspire, Power, Veriton, Extensa, Ferrari, TravelMate, Altos): Press [F2] or [Del] Immediately After Power Up
Acer (Altos 600 Server): Press [Ctrl]+[Alt]+[Esc] or [F1] During Boot (for Advanced Options)
Acer (Older PC): Press [F1] or [Ctrl]+[Alt]+[Esc] to Access BIOS
AMI (American Megatrends AMIBIOS, AMI BIOS): Press [Delete] During Boot
AMI
AMI (American Megatrends AMIBIOS, AMI BIOS) – Old Version: Press [F1] or [F2] During Boot
Award BIOS (AwardBIOS): Press [Del] After Powering Up Computer
Award BIOS (AwardBIOS) – Old Version : Press [Ctrl]+[Alt]+[Esc] During Boot
ALR: Press [Ctrl]+[Alt]+[Esc] or [Ctrl]+[Alt]+[Del] During Boot
ARI: Press [Ctrl]+[Alt]+[Esc] or [Ctrl]+[Alt]+[Del] During Boot
AST Advantage: Press [Ctrl]+[Alt]+[Esc] During Boot
Compaq (Presario, Prolinea, Deskpro, Systempro, Portable): Press [F10] When Blinking Cursor Jumps To Top Right Corner of Screen
Compaq (Presario, Prolinea, Deskpro, Systempro, Portable): Press [F10] When Logo Screen Is Displayed
Compaq (Older Computers): Press [F1], [F2], [F10], or [Del] Key
Cybermax: Press [Esc] Key
Dell (XPS, Dimension, Inspiron, Latitude. OptiPlex, Precision, Vostro): Press F2 When Dell Logo Is Displayed Until “Entering Setup” Appears
Dell (Older 486 Models): Press [Ctrl]+[Alt]+[Enter] During Boot
Dell (Some Models): Press Reset Button Twice (i.e. Power Reset Button)
Dell Dimension L566cx System: Press [Del]
Dell (Older Laptop Models) : Press [Fn]+[Esc] or [Fn]+[F1]
DTK (Datatech Enterprises): Press [Esc] Key Right After Powering On the PC.
EISA Computer: Press the Reset button on the Front of the Computer, then Press [Ctrl]+[Alt]+[Esc] immediately when the memory count begins or Press [Crtl]+[Alt]+[S].
eMachines (eMonster, eTower, eOne, S-Series, T-Series): Press [Tab] or [Del] During Boot
eMachine (Some Older Computers): Press [F2]
Fujitsu (LifeBook, Esprimo, Amilo, Tablet, DeskPower): Press [F2] When Fujitsu Logo Is Appearing.
Gateway Using Phoenix BIOS (DX, FX, One, GM, GT, GX, Profile, Astro): Press [F1]
Gateway (Some Older PCs): Press [F2]
Hewlett-Parkard (HP Pavilion, TouchSmart, Vectra, OmniBook, Tablet): Press [F1] Upon Startup or Bootup
Hewlett-Parkard (HP Alternative): Press [F2] or [Esc]
Hewlett-Parkard (HP) Tablet PC: Press [F10] or [F12]
IBM ThinkPad using IBM BIOS (Early Models): Press [Ctrl]+[Alt]+[Ins] When Cursor Is At Upper-Right Corner of Screen
IBM ThinkPad using IBM BIOS (Later Models): Press and Hold [F1] When Powering Up Laptop
IBM ThinkPad using Phoenix BIOS: Press [Ctrl]+[Alt]+[F11] from DOS Prompt
IBM PS/1 (Late Models), PS/ValuePoint and 330s: Press [Ctrl]+[Alt]+[?]
IBM PS/2 with Reference Partition: Press [Insert] During Boot
IBM PS/2: Press [Ctrl]+[Ins] When Pointer Is At Top Right of Screen
IBM PS/2: Need Reference Disk and ADF Disk for Setup
IBM PS/2 75 and 90: Press [Ctrl]+[Alt]+[?]
IBM (PC, XT, AT): Press [F1] Immediately On Powering On the Computer
IBM (Older Computers or Notebooks): Press [F2]
Lenovo (ThinkPad, IdeaPad, 3000 Series, ThinkCentre, ThinkStation): Press [F1] or [F2] on Boot Up
Lenovo (Older Products): Press [Ctrl]+[Alt]+[F3], [Ctrl]+[Alt]+[Ins] or [Fn]+[F1].
Microid Research MR BIOS: Press [F1]
Micron (MPC Computers ClientPro, TransPort): Press [F1], [F2] or [Del] On Startup
NEC (PowerMate, Versa, W-Series): Press [F2] During Boot
NEC Versa Notebook: Press and Hold Down [F1] Upon Startup or Bootup
Olivetti PC Pro: Press [Ctrl]+[Alt]+[Shift]+[Del](in Num Pad) During Boot
Packard Bell (8900 Series, 9000 Series, Pulsar, Platinum, EasyNote, imedia, iextreme): Press [F1], [F2], or [Del].
Packard Bell (Early 386 and 486 Dodels): Press [Ctrl]+[Alt]+[S] Sequence
Phoenix BIOS (Phoenix-Award BIOS): Press [Del] During Power On Self-Test
Phoenix BIOS (Phoenix-Award BIOS) – Old Version: Press [Ctrl]+[Alt]+[S], [Ctrl]+[Alt]+[Esc], [Ctrl]+[Alt]+[Ins] or [Ctrl]+[S] During Power On Boot Self-Test Right After Startup
Sharp (Notebook Laptops, Actius UltraLite): Press [F2] On Computer Starts
Sharp (Old PCs): Require Setup Diagnostics Disk to Access BIOS
Shuttle (Glamor G-Series, D’vo, Prima P2-Series, Workstation, X Mini XPC, Surveillance): Press [F2] or [Del] on System Startup
Sony (VAIO, PCG-Series, VGN-Series): Press [F1], [F2] or [F3] After Turning On the Computer
Sony Vaio 320 Series: Press [F2] During Boot
Tandon 386: press [Ctrl]+[Shift]+[Esc]
Tandon: press [Ctrl]+[Shift]+[Esc]
Toshiba (Portégé, Satellite, Tecra): Press [Esc] During Boot
Toshiba (Portégé, Satellite, Tecra with Phoenix BIOS): Press [F1] during Boot
Zenith, Phoenix: Press [Ctrl]+[Alt]+[Ins] During Boot

Miscellaneous and Other Common BIOS Key Sequences

[Ctrl]+[Esc]
[Ctrl]+[Ins]
[Ctrl]+[Alt]
[Ctrl]+[Alt]+[+]
[Ctrl]+[Alt]+[F3]
[Ctrl]+[Alt]+[Del]
[Ctrl]+[Alt]+[S]
[Ctrl]+[Alt]+[Enter]
[Ctrl]+[Alt]+[Ins]
[Ctrl]+[Alt]+[Esc]
[Ctrl]+[Shift]+[Esc]
[Tab]
[F1]
[F3]
[F4]
[F10]
[F12]
[Fn]+[Function Key]

Note that for some older system with Phoenix BIOS, the following steps are required to get to BIOS setup screen:

1. Exit or boot up to DOS.
2. Press [Ctrl]+[Alt]+[Esc] to enter setup screen.
3. If hot key sequence above doesn’t work due to changes or problems been made on the system, then try to use the key to lock the keyboard while leaving computer switched on.
4. Press the Reset button on the front of the computer. A message will appear asking user to unlock the keyboard.
5. Unlock the keyboard and press [F2] to run the CMOS setup.
6. Press [Del] to bring up the CMOS setup program.

Related Articles

• Press Space Bar To Quick Access Windows Boot Manager
• How to Access Windows Virtual PC BIOS Setup Utility
• Comprehensive List of Command Prompt Keyboard Accelerators (Shortcut Keys)
• Review and Compare Computer Systems via FreshDiagnose
• Free Download WinPatrol To Monitor Computer Systems From Unauthorized Changes
• Lenovo Adds BIOS Option to Configure Ctrl and Fn Key Functions in Future ThinkPad Notebooks
• RW-Everything Utility Free Download to Access and Dump Computer Hardware Info
• Recover or Undo Corrupt AMI BIOS Flash Update
• Undo Award BIOS Flash and Recovery
• Access Your Computer Anywhere with icloud

This entry was posted on Sunday, July 6th, 2008 at 3:05 am and is filed under Tips & Tricks. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.