Fix Install Fail or Endless Loop Problem in Vista WU by Downloading Update KB937287修復安裝失敗或無限循環的問題在Vista吳下載更新kb937287
Update for Windows Vista (KB937287) is a prerequisite update package before users able to install Service Pack 1. Windows Vista的更新（ kb937287 ）是一個先決條件更新程序包之前，用戶可以安裝Service Pack 1 。 Update package 937287 contains updates to the Windows Vista installation software, the component that handles the installation and the removal of software updates, language packs, optional Windows features, and service packs.更新程序包937287包含更新到Windows Vista安裝的軟件，該組件處理的安裝和拆卸的軟件更新，語言包，可選的Windows功能，以及所需的Service Pack 。 Update 937287 is necessary to successfully install and to remove Windows Vista SP1 and selected future updates on all versions of Windows Vista, and may be required before selected future updates can be installed.更新937287是必要的成功安裝和移除Windows Vista的SP1和選定的未來的更新對Windows Vista的所有版本，並有可能在提出前必須得到選定的未來的更新可以安裝。
However, some users have reported that the KB937287 cannot be installed properly on both the 32-bit and 64-bit Vista (x86 and x64) system.不過，有些用戶報告說，該kb937287不能正確安裝兩地32位和64位Vista版（ x86和x64 ）系統。 The problem symptoms can be that the KB 937287 update claims to be successfully installed after installation process, but it keeps reappearing in Windows Update, which keeps asking users repetitively to install this update.問題的症狀，可以說的KB 937287更新聲稱自己是成功安裝後，安裝過程中，但它不斷出現在Windows Update ，不斷要求用戶重複安裝此更新。 Or the KB937287 can be simply failed to install repetitively again and again, even after restart and full shut down. kb937287 ，或可根本沒有安裝重複一而再，再而，即使在重新啟動和全面關閉。
Microsoft has Microsoft已 acknowledged the problem承認問題 involving KB937287, but doesn’t have any solution yet.涉及kb937287 ，但並沒有任何尚未解決。 For those who face the problem of cannot install KB937287, try to download the standalone setup package for KB937287 from Microsoft Download Center and install the update manually.對於那些誰面對的問題，無法安裝kb937287 ，嘗試下載獨立的安裝套件kb937287從Microsoft下載中心和安裝更新程序手動。
KB937287 v2 has been released kb937287的V2已被釋放 , which futher requires KB949939 to fix the problem. ，從而進一步要求kb949939 ，以解決這一問題。
Download下載 Update for Windows Vista (KB937287) Windows Vista的更新（ kb937287 ） ( （ Windows6.0-KB937287-x86.msu windows6.0 - kb937287 - x86.msu ) ）
Download下載 Update for Windows Vista for x64-based Systems (KB937287) Windows Vista的更新基於x64的系統（ kb937287 ） ( （ Windows6.0-KB937287-x64.msu windows6.0 - kb937287 - x64.msu ) ）
Note that after installing KB937287, it cannot be removed or uninstalled.請注意，安裝完畢後kb937287 ，無法刪除或卸載。
IMPORTANT : This is a machine translated page which is provided "as is" without warranty. 重要說明 ：這是一個機器翻譯網頁是“按原樣”提供的擔保。 Machine translation may be difficult to understand.機器翻譯可能很難理解。 Please refer to請參閱 original English article英文原版的文章 whenever possible.只要有可能。
Share and contribute or get technical support and help at分享和貢獻，或取得技術的支持和幫助，在 My Digital Life Forums 我的數字生活論壇 . 。
Related Articles相關文章
- KB937287 Fails to Install At Stage 3, Unable to Reinstall or Uninstall and Restarts Repetitively kb937287不能安裝在第3階段，無法重新安裝或卸載並重新啟動反复
- Trick to Download and Install Standalone Offline Vista SP1 RTM with WU .CAB Files伎倆下載並安裝獨立的離線Vista的SP1中的RTM與吳。 cab文件
- Torrent Harvester Engines Definitions Unable to Update Fail Error Fix洪流收割機引擎的定義，無法更新失敗的錯誤修正
- Windows Update and Windows Sidebar Problems after Using Vista MUI Tools to Install and Switch to New Language Pack Windows Update和Windows邊欄的問題後，使用Vista的梅窩的工具來安裝和切換到新的語言包
- avast! avast ！ Antivirus Automatic Update Fails to Start When Clicked in Vista Problem防病毒的自動更新無法啟動，當按下時在Vista中的問題
- Guide to Upgrade or Install Windows Vista SP1 RC 1 Build 6001.17052 (v.668) Online指南升級或安裝Windows Vista SP1的鋼筋混凝土一，建立6001.17052 （ v.668 ）在線
- Fix Vista Winodws Update Error Code 80004002修復Vista的winodws更新錯誤代碼80004002
- Windows Update KB905474 and KB913446 Installation Failed with Error Code 0×80242006在Windows Update 905474和KB913446發布安裝失敗，錯誤碼0 × 80242006
- KB931573 May Invalidate Windows Vista Activate Crack with Solution kb931573可能無效的Windows Vista激活裂紋與解決方案
- Fix Error 1603 When Installing Intuit Quickbooks 2007修正錯誤1603安裝時， Intuit公司的QuickBooks 2007
February 21st, 2008 18:51 2008年2月21日18時51分
Stupid question, I guess, but if users are stuck in a reboot-loop, how are they supposed to manually download and install an update to fix the reboot-loop?愚蠢的問題，我猜想，但如果用戶停留在重新啟動的閉環，他們如何去手動下載並安裝更新修補程序重新啟動閉環？
February 22nd, 2008 01:15 2008年2月22日1時15分
It’s not endless reboot loop, but rather the updates always re-appear in WU.它不是無休止的重新啟動迴路，而是更新總是重新出現在吳。
February 22nd, 2008 02:51 2008年2月22日02:51
Ahh, different bug then I guess. ahh ，不同錯誤的話，我猜。 I know some users were stuck in a reboot loop who couldn’t even get into safe mode.我知道有些用戶停留在重新啟動迴路誰甚至無法進入安全模式。 Seems like a related bug, but then at least there’sa fix for those with the less severe version.好像一個相關的錯誤，但當時至少有修正為那些與較不嚴重的版本。
February 22nd, 2008 12:15 2008年2月22日12時15分
Yes, this article is for less serious problem.不錯，這條是不太嚴重的問題。 Some users face “Configuring Updates Step 3 of 3 — 0% Complete” when installing SP1 after this update, also in loop repetitively.一些用戶面對“配置更新的步驟3 3 -0 ％完成”時，安裝S P1後，此更新，也是在反复循環。
February 24th, 2008 22:25 2008年2月24日22時25分
[...] when users are installing it from Windows Update. [ … … ]當用戶安裝它從Windows Update 。 For lucky Vista users, they may only face installation of KB937287 failed issue, which can be resolved by downloading standalone update package from Microsoft Download [...]為幸運的Vista用戶，他們可能只為顧客提供面部安裝kb937287沒有問題，這是可以解決的下載獨立的更新程序包從Microsoft下載[ … … ]
February 25th, 2008 02:32 2008年2月25日02:32
[...] lucky Vista users, they may only face installation of KB937287 failed issue, which can be resolved by downloading standalone update package from Microsoft Download [...] [ … … ]幸運的Vista用戶，他們可能只為顧客提供面部安裝kb937287沒有問題，這是可以解決的下載獨立的更新程序包從Microsoft下載[ … … ]
April 13th, 2008 11:23 2008年4月13日11時23分
[...] installation program for SP1. [ … … ]的安裝程序SP1的。 Unfortunately, lots of users experience various problems such as unable to install the update, or even worse, computer falls into endless reboot cycle.不幸的是，很多用戶遇到各種問題，如無法安裝此更新，或更糟糕的是，電腦陷入無休止的重新啟動循環。 As a result, Microsoft stops and [...]因此，微軟站及[ … … ]
May 23rd, 2008 18:37 2008年5月23日18時37分
I am stuck in the endless reboot cycle as well step 3 of 3 0% complete.我一直停留在無休止的重新啟動週期以及第3步的3 0 ％完成。 I didn’t get this install though until about a week ago, not sure if this was a reissue or what.我沒有得到這個安裝雖然，直到大約一個星期前，不知道如果這是一個重發或什麼。 I’m hopelessly trying to get my computer back to running, even if I must lose my data, at this point that would be a small price to pay for this Hell I’ve been put through.我絕望企圖得到我的電腦回到運行，即使我必須失去我的數據，在這一點上這將是一個小的代價，這地獄，我已經通過。 Any suggestions on how to get this resolved…..任何建議，就如何得到這個解決… .. I can’t even find out which update it is to provide a number for you….我不能，甚至找出哪些更新，是要提供一個號碼為您… … 。 and my install disks are on my partitioned D: drive so I can’t even get that to work to reformat.和我的安裝盤是我的分割d ：驅動器，所以我不能，甚至拿到工作，以重新格式化。 ARGH!!!!啊！
July 31st, 2008 05:50 2008年7月31日5時50分
Ok,好的，
this is the solution that I used to resolve the “Configuring Updates Step 3 of 3 — 0% Complete” infinite reboot cycle:這是解決方案，我用，以解決“配置更新的步驟3 3 -0 ％完成”無限重新啟動週期：
(Preface: you need a “live cd” too boot into an environment from which you may delete or rename the “pending.xml” file, to do this, I used the free and open source Ubuntu Linux distribution.) （前言：你需要一個“的live CD ”太開機進入一個環境，從您可能刪除或重新命名的“ pending.xml ”文件，為此，我用自由和開放源碼Ubuntu的Linux發行） 。
Step-by-step:分步：
1) find a friend with a working computer, CD-Burner and blank CDROM. 1 ）找到一個朋友同一個工作小組，電腦，光碟燒錄機及空白光碟。 Visit the Ubuntu download site:訪問Ubuntu的下載網站： http://www.ubuntu.com/getubuntu/download
2) download the desktop edition ISO 2 ）下載桌面版本的ISO
3) burn the ISO to disk (if you don’t know how to do this do a bit of googling - it’s beyond the scope of this fix) 3 ）燒傷的ISO到磁盤（如果您不知道如何做這做一點在Google上搜尋-它的範圍以外的此修補程序）
4) once burnt, boot your broken Windows Vista computer, but use the appropriate key combination to change the boot settings to tell it to boot from the CDROM 4 ）一旦燒毀，啟動打破了Windows Vista計算機，但使用適當的組合鍵以改變開機設定告訴它開機從光盤
5) the Ubuntu CD should offer you a language selector and then the option “Try Ubuntu without modifying your computer” 5 ） Ubuntu的裁談會應為您提供了語言選擇，然後選擇“嘗試Ubuntu的而不需要修改您的計算機”
6) Ince Ubuntu has booted, go to the “Places” menu in the top menu bar. 6 ）自Ubuntu的已啟動，請轉到“地方”菜單在頂部的菜單欄。
7) Within the places menu, you’ll see some “disk drives” listed, you should be able to guess which one might be the one that is your Windows Vista C Drive by it’s size or name, eg “75.4GB disk” or “Presario” or “System” etc… it depends upon your computer. 7 ）的地方，菜單中，您會看到一些“磁盤驅動器”上市，您應該可以去猜測其中可能有一個是您的Windows Vista C驅動器，由它的大小或名稱，如“ 75.4gb磁盤“或” Presario配置“或”系統“等… ，這取決於您的計算機上。
9) a disk icon should then appear on the Ubuntu desktop that you can then double click and explore. 9 ）的磁盤圖標，然後出現在Ubuntu的桌面，您可以然後雙擊和探索。
10) Confirm that it’s the correct disk partition by looing for familiar folder names such as “Users”, “Windows” etc.. 10 ）確認它的正確的磁盤分區由looing熟悉的文件夾的名稱，如“用戶” ， “窗口”等。 (if not try one of the others as described in step 7) （如果不是嘗試之一，其他人所描述的步驟7 ）
11) navigate to the following folder: windows/winsxs 11 ）瀏覽到以下文件夾：在Windows / winsxs
12) locate the file “pending.xml” and rename it by pressing F2 on your keyboard and editing the file name to something like “pending.xml.broken” perhaps. 12 ）找到該文件“ pending.xml ” ，並重新命名為它的迫切F2代對您的鍵盤和編輯的檔案名稱，以類似“ pending.xml.broken ”也許。
13) restart the computer via the ubuntu System -> Quit… Restart options 13 ）重新啟動電腦，通過Ubuntu的系統-> “退出…重新啟動選項
14) remove the live cd when prompted. 14 ）刪除的live CD提示時。
15) let the machine boot up back into Windows Vista, it may go back to the “configuring updates” screen again - but don’t panic - be patient. 15 ） ，讓機器開機回到Windows Vista的，它可能返回到“配置更新” ，屏幕上再次-但不要恐慌-要有耐心。 It should switch after a while to say “Welcome” and eventually take you to your normal Windows Vista desktop.它應開關後，雖然說“歡迎” ，並最終帶您到正常的Windows Vista桌面。
This worked for me, I hope it works for you too.這個工作對我來說，我希望它的工程你也。
Good luck.祝您好運。
August 21st, 2008 19:56 2008年8月21日19時56分
this actually did work…….thanks man….im so happy :):):)這其實是沒有工作… … 。感謝男子… … 。即時消息太高興:):):)