TCP 연결 한계를 증가하는 다운로드 비스타 tcpip.sys와 UAC 자동 Patcher

창 비스타 TCP/IP (tcpip.sys)와 UAC 자동 Patcher는 자동으로 대체하는 간단한 배치 명령 원본이고 원래 tcpip.sys를에서 \ (포함되는) 변경되고 비스타가 한번만 발사할 수 있는 동시 반에 열려있는 TCP/IP 연결 시도 부과된 한계를 자물쇠로 열고 제거하기 위하여 부서진 기워진 tcpip.sys 버전을 가진 창 \ System32 \ 운전사 \ 폴더 겹쳐서 쓴다. 금지를 제거하기 위하여 tcpip.sys를 이득이 깁는에 의하여 잠재적으로 열매를 산출하거나 아래에로 문제를 해결한다.

• 기술하는 사건 구경꾼에서 사건 ID 4226는 TCP/IP 도달했다 동시 TCP의 수에 부과된 안전 한계를 연결한다 시도를 (정보 더).
• BitTorrent (BT) 클라이언트와 eD2K eMule 클라이언트와 같은 P2P 신청을 사용할 경우 적재하거나 상쾌하게 할 수 없습니다 웹 페이지와 같은 찾아본 속도를 감속하십시오.
• P2P 프로그램을 사용할 경우 급류 속도를 개량하고 느린 또는 이동하는 downloading 및 올려주기 속도를 고치십시오. (보십시오 비스타에 있는 급류 속도를 낙관하는 방법)

사용 비스타 tcpip.sys와 UAC 자동차 Patcher에 전제조건

마이크로소프트는 tcpip.sys의 버전의 많음을 풀어 놓았다, 따라서 각 창 비스타 TCP/IP와 UAC 자동 Patcher의 다른 버전은 설치된 tcpip.sys의 이체에 따라서 창 비스타의 특정 버전에서만, 작동할 것이다. tcpip.sys의 버전을, 항해하기 위하여 \ 창 \ System32 \ 운전사 폴더 검사하는 것은, 권리 tcpip.sys를 클릭하고 "재산" 선정하고, 버전 정보는 "세부사항" 창유리를에서 목록으로 만들어질 것이다.

비스타 tcpip.sys와 UAC 자동차 Patcher의 특징

• 자동으로 TCP/IP 연결 한계를 자물쇠로 여는 기워진 버전으로 tcpip.sys를 베끼고 교환하십시오.
• 최대 동시 사건을 반 연다 50,000에 TCP 연결 시도를 놓으십시오.
• 무능 사용자 계정 통제 (UAC).
• 무능 비스타 TCP 자동 조정 가능한 네트워킹 문제를 극소화하는 특징.

다운로드 비스타 tcpip.sys와 UAC 자동차 Patcher

비스타 tcpip.sys와 UAC 자동 Patcher v1.6: VistaTcpipUacPatch1.6.rar (거울)
tcpip.sys 버전 6.0.6000.16386를 가진 비스타 RTM를 위해. (지원 x86/32 조금과 x64/64 조금 판)

비스타 tcpip.sys와 UAC 자동 Patcher v1.9: VistaTcpipUacPatch1.9.rar (거울)
tcpip.sys 버전 6.0.6000.16567를 가진 비스타 RTM를 위해, KB941644를 설치한 후에 적용 가능한. (지원 x86/32 조금과 x64/64 조금 판).

비스타 tcpip.sys와 UAC 자동 Patcher v1.9b: VistaTcpipUacPatch1.9b.rar (거울)
tcpip.sys 버전 6.0.6000.20를 가진 비스타 RTM를 위해689, KB941644를 설치한 후에 적용 가능한. (지원 x86/32 조금과 x64/64 조금 판).

비스타 tcpip.sys와 UAC 자동 Patcher v1.9c: VistaTcpipUacPatch1.9c.rar (거울)
tcpip.sys 버전 6.0.6000.16627를 가진 비스타 RTM를 위해, KB946456를 설치한 후에 적용 가능한. (지원 x86 또는 32 비트 판 전용)

비스타 tcpip.sys와 UAC 자동 Patcher v1.9d: VistaTcpipUacPatch1.9d.rar (거울)
For Vista RTM with tcpip.sys version 6.0.6000.20752, applicable after installing KB946456. (Support x86 or 32-bit edition only)

Vista tcpip.sys and UAC Auto Patcher v2.0: VistaTcpipUacPatch2.0.rar (mirror)
For Vista SP1 with tcpip.sys version 6.0.60001.18000 (Support x86 or 32-bit edition only)

User has problem applying or EventID 4226 still appearing can try to use Windows Vista SP1 64-bit (x64) tcpip.sys version 6001.18000 Auto Patcher.

Vista tcpip.sys and UAC Auto Patcher v2.1a: VistaTcpipUacPatch2.1a.rar (mirror or mirror 2)
For Vista SP1 with tcpip.sys version 6.0.60001.18000 (Support both x64 and x86 Windows Vista SP1 - run InstallPatch32.bat or InstallPatch64.bat accordingly.)

Vista tcpip.sys and UAC Auto Patcher v2.2: VistaTcpipUacPatch2.2.rar (mirror 1 or mirror 2)
For Windows Vista SP1 with tcpip.sys version 6.0.60001.18063 or 6.0.6001.22167 (Support both x64 and x86 Windows Vista SP1 - check the version of system tcpip.sys located in \Windows\System32\drivers folder, and run Install32-18063.bat or Install32-22167.bat for 32-bit Vista or Install64-18063.bat or Install64-22167.bat accordingly.)

Vista tcpip.sys and UAC Auto Patcher v2.2a (TEST version): VistaTcpipUacPatch2.2.rar
TEST ONLY. Try only if version 2.2 doesn’t work for 64-bit. For those who trying, please post in comment if this version works. For Windows Vista SP1 with tcpip.sys version 6.0.60001.18063 or 6.0.6001.22167 (Support both x64 and x86 Windows Vista SP1 - check the version of system tcpip.sys located in \Windows\System32\drivers folder, and run Install32-18063.bat or Install32-22167.bat for 32-bit Vista or Install64-18063.bat or Install64-22167.bat accordingly.)

The auto patcher can also be downloaded from yaronmaur.net.

Usage Guide / Installation

Unpack and extract the content of the archive, and then run InstallPatch32.bat (for x86 system) or InstallPatch64.bat (for x64 system). Administrator rights elevation required.

IMPORTANT for 64-bit (x64) Windows Vista (RTM and SP1) and 32-bit (x86) Windows Vista SP1:

Windows Vista now require all kernel-mode driver or software to be signed with digital signature in 64-bit Vista, and all boot-start drivers must be embedded-sign with signature on both x86 and x64 versions of Windows Vista. Unfortunately, tcpip.sys is both kernel mode driver, and also boot start driver, and modify tcpip.sys will break the existing signature, making the patched tcpip.sys unsigned.

So when using patched tcpip.sys, users must press F8 at every Windows boot load. When come to Vista Advanced Boot Options menu, select “Disable Driver Signature Enforcement” to bypass driver signing check and continue loading Windows Vista, else there may be boot-failure. The process can be automated with ReadyDriverPlus.

Uninstallation

Run UndoPatch.bat to restore original tcpip.sys (provided you don’t delete the backup tcpip.sys.original), uninstall and remove concurrent half-open TCP/IP connection limit setting in the registry, revert TCP/IP autotuning level to normal, and re-enable UAC.

FAQ and Troubleshooting

1. How to change the connection limit to other value?

   Users can change the limit to any value by navigating to the following registry key using Registry Editor:

   [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\]

   Locate “TcpNumConnections” registry value and change its value data to number you want.

2. I don’t want to disable UAC, how to re-enable UAC?

   Run “Enable_UAC_Prompt.reg”, if you no longer want to patch tcpip.sys, run “UndoPatch.bat”. It’s also possible to use tool such as TweakUAC.

3. After installing patched tcpip.sys, the following problem exists on system boots up whenever restarts:
   

   Windows Failed to Start. a recent hardware or software change might be the cause. To fix the problem:
   1. Insert your Windows installation CD & restart.
   2. Choose Language.
   3. Click “Repair…”

   File: \Windows\System32\drivers\tcpip.sys
   Status: 0xc0000428
   Info: Windows cannot verify the digital signature for this file.

   Long answer makes short is press “Enter”, or pressing F8 while system starts up, which will display Vista Advanced Boot Options startup menu. Then select to “Disable Driver Signature Enforcement”. See explanation above on usage instruction, and there is no workaround to this annoyance yet or use ReadyDriver Plus to permanently automate disabling of driver signature enforcement. Else, try out CrackTcpip.sys driver based limit bypass.

4. Can I manually install the patched tcpip.sys manually?

   Yes. Checkout the manual installation guide.

Flip to next page for changelog history.

Pages: 1 2

IMPORTANT: This is a machine translated page which is provided "as is" without warranty. Machine translation may be difficult to understand. Please refer to original English article whenever possible.

Share and contribute or get technical support and help at My Digital Life Forums.

Related Articles

• Windows Vista tcpip.sys Connection Limit Patch for Event ID 4226
• TCP/IP Has Reached the Security Limit Imposed on the Number of Concurrent TCP Connect Attempts Error on Windows Vista
• Windows XP SP2 TCP Connection Limit (Event ID 4226)
• Increase Multithread Download Speed by Disable Vista Auto Tuning on TCP/IP
• Limit Maximum TCP Connections to Web Servers
• TCPIP.SYS Driver Patcher CrackTcpip.sys for Vista SP1 v.744 and 6001.18000 (RTM)
• VistaTcpPatch Windows Vista TCP Half Open Limit Auto Patcher GUI Version
• Optimize and Increase BitTorrent (BT) Download Speed in Vista
• Vista TCP Window Scaling Auto Tuning May Slow Down Network Performance
• Tweak (Increase or Change) Maximum Simultaneous HTTP and Downloads Connections to Web Server

This entry was posted on Sunday, February 17th, 2008 at 5:20 pm and is filed under Windows Vista. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.