Fix Windows No System Sound and Audio Problem
Windows system does not gives you sound and audio suddenly or despite sound card or audio device is present and working previously? Windows XP, 2000, NT, 2003 or even Vista computers may lost Windows audio and system sounds output due to the mess on file system or registry that created or left by third party utilities after installation and uninstallation, or corrupted and missing codecs, a component necessary to decompress and decode media files so that can be playback by Windows system.
When the Windows no sound problem occurs, the symptoms include users do not hear any Windows system sound even though the volume control on speakers have turned on, and all audio mixers and EQs is not muted. Users cannot hear sound from mouse start navigation clicks, Windows startup sound, messenger’s user online or incoming message notification alert and etc. Even Flash video clips hosted on YouTube, Google Video, Dailymotion, CNet Video, MetaCafe, and etc will not output the sound, even though video playback fine without problem.
If you have no sound problem only on Flash objects (video on Youtube, Flash games and etc), try out the Flash no sound registry fix, especially on wavemapper registry key. Else if you try to uninstall and install drivers again, restore to previous system restore point, changing sound card or switch it to another PCI slot will not solve the no sound problem.
Here is a simple trick to fix Windows system no sound problem. The trick works by using a tool built into K-Lite Codec Pack.
- Download and install K-Lite Codec Pack version 3.3.0 Full from here or here, or choose other versions from more mirrors here. You can deselect most components that you don’t need, except Codec Tweak Tool under the Tools section.
- After installed, click on Start button, then go to All Programs -> K-Lite Codec Pack -> Configuration -> Codec Tweak Tool.
- In the Codec Tweak Tool window, tick the check box next to [Registry] Fix non-working system sound.
- Click on Next button, and your Windows no sound problem should be fixed, and working as usual.
Related Articles
- Youtube, Dailymotion Google Video, Flash Games and Applications No Sound and Audio in Windows
- Enable Windows DreamScene Audio and Sound
- How to Enable Repeat Play Audio Sound Notifications in Windows Mobile
- Redirect, Stream and Listen All Audio, Sound and Music from Windows Mobile 5 and 2003 Devices to Bluetooh Headset or Earpiece
- Superb Sound Quality from Astro A40 Audio System For Game Enthusiasts
- Adobe Flash No Sound WaveMapper Trick
- Creative Sound Blaster Easy Record Kit to Convert Analog Cassette Audio to Digital Music Format
- Improve Audio Compatibility in Windows Vista with Conexant High Definition Audio Driver Version 4.33.1.60 A
- Download Realtek HD Audio Driver 2.16 (Supports Windows 7)
- Extract Audio Tracks From Video Files With Pazera Free Audio Extractor
Entries (RSS)
November 24th, 2009 05:34
Nat, make the checkbox activ “detect broken codecs…”, and then press next
November 1st, 2009 02:35
I had the same problem. Fortunately for me it happened right after I uninstalled “JAVA(TM) 6 update 7″. So I restored Vista back to the point before that uninstall. Now the Windows sounds are back and YouTube videos have sound again.
October 11th, 2009 20:04
please help me i have a Nec VersaPro VY14M/RF-W laptop but since Microsoft Windows XP Professional Pack 2 was installed my sound driver is lost. There no sound comin out of my system. I have tried several driverS but its not working still. PLEASE HELP ME.
October 4th, 2009 03:54
Thanks a ton.. !!! It worked… Almost went ahead to reinstall my xp..
Thanks buddy once again!!!
September 29th, 2009 21:50
I have tried every single thing on this website but nothing worked. All I did was upgrade my Vista to service pack 2 and behold I now have sound! I suggest others try the same
September 19th, 2009 00:59
can anyone please help me? i tried the tweak tool and the box to fix the .wav/midi wasn’t even available to select. it was greyed out and there was this:
“[no problem detected]”
This is SO frustrating. Please, if you can help, email me: adamryan@live.com
Thank you.
-adamryan
June 21st, 2009 15:16
Thank you very much..
this solve my problem..
i almost format my windows because of it..
regards
firman
June 17th, 2009 08:23
Thanks!!! Thanks!!! Thanks!!! Thanks!!! Thanks!!! Thanks!!! Thanks!!! Thanks!!!
I have been looking for a solution all day long. Tried everything and (Thanks God) I found this blog.
It worked marvelously.
Thanks!!! Thanks!!! Thanks!!! Thanks!!!
April 28th, 2009 08:18
To any others like me who trawled online and tried every solution without success, I’ve come up with a fix. The wavemapper registry fix is soooooooo close!
1. In Vista, switch off UAC (this step may not be necessary but was on the machine i was fixing)
2. Get hold of anybody with a working Vista machine and ask them for their msacm32.drv file (in C:\Windows\System32 folder). U can gladly email me on zzadz@hotmail.com and i’ll send u mine.
3. Copy their file into ur C:\Windows\System32 folder-if like me you already have a msacm32.drv fle that you ASSUMED to be working ok, rename the new file msacm32.1.drv
4. Open regedit, go to LOCAL MACHINE\SOFTWARE\MICROSOFT\WINDOWS NT\CURRENT VERSION\DRIVERS 32 and open the WAVEMAPPER key.
5. Change the value to msacm32.1.drv
This works straight away – i guess the msacm32.drv file is corrupt and Windows has no way of telling you.
Please pass this solution on – i cant find it anywhere else on the net!
April 10th, 2009 19:56
This fix worked a treat for me. I had been trying to fix this problem for nearly 3 months. The only thing I might mention is the new version of the software automatically fixes the busted codecs and there is no longer an option in the menu.
Cheers
March 29th, 2009 08:04
Have been trying to solve the sound problem for ages but this actually works…………i tried the adding msacm32.drv to my win32 which didnt work for me but worked for others, but this actually worked for me……..so thanks dude
March 28th, 2009 22:46
The K-Lite Codec Tweak Tool is also available as a separate download.
http://www.codecguide.com/download_other.htm#codectweaktool
If the fix is invisible, then make sure you run the tool on an administrator user account.
If the fix is grayed out, then it means that this particular fix is not needed. Your problem has some other cause (bad driver?) and will require a different fix.
March 22nd, 2009 14:39
could not fix it because the registry box suggests that there is no problem
March 15th, 2009 03:41
Same problem as Nat and kmm… What next? Help please!
February 21st, 2009 14:59
Thanks bro! that was a great tip . it solved the problem instantly
February 9th, 2009 01:20
absolutely great!!!!
January 14th, 2009 13:42
I need to give a HUGE thanks for this gem! I too have been searching high and low for the fix to this HP laptop (dv9000 – dv9310us for others searching). I downloaded the newest version 445f, de-selected everything but the Tweak Tool… and as part of the install it auto-magically detected registry problems and asked if I’d like to fix them… AND IT DID! Now I get system sounds, YouTube, etc. Like others, DVD player made audio, iTunes made audio, but not the basics. I was *this* close to a complete OS re-image. THANKS AGAIN!
October 13th, 2008 15:28
Have same problem as Nat, no option under Fixes!
October 10th, 2008 07:42
There is no [Registry] Fix non-working system sound anywhere in the window
September 9th, 2008 19:30
[...] ville heller gjort dette: Fix Windows No System Sound and Audio Problem My Digital Life Fjern alle codecs og legg in k-lite codec packs. Da virker det [...]
September 7th, 2008 09:45
This didn’t work
I got the message “no audio output installed” still
r u sure?
August 28th, 2008 08:31
Thanks a lot boss……. Thank u soooooooooo much..
August 27th, 2008 06:07
You are THE MAN!!!
This fix worked like a charm.
After 3 sound cards and about 500 lost hair folicles once I ran your suggested program and heard the sound through my speakers I know my troubles were over. Thanks
August 7th, 2008 14:27
followed this advice but i downloaded the newest full version of the k-lite codec from http://www.free-codecs.com/download/K_Lite_Codec_Pack.htm and installed it. was very helpful since it automatically detected and recommended to unistall any existing codecs that would interfere with the k-lite codec. during installation, any problems with the registry were also fixed. after installing i went to youtube and my sound was back. thanks!!!
July 21st, 2008 22:34
This fixed my problem of not getting any sound from youtube and any application that ran on the internet. Thank you
July 18th, 2008 05:08
Mega danke,
Habe alles versucht und das hat mein problembehoben
July 9th, 2008 05:25
Yesss. I was suffering for a long time. My vista stopped system sounds and web page sounds. tried everything but klite solved it. thanks a lot.
plus i have many codecs for which i will not have to download and install mass programs; they cause more trouble than they solve. cheers.
June 24th, 2008 06:16
Used your download and tried the fix. Still no sound.
Previously, I reloaded the lost sndvol32.exe file and that restored my icon. Also, tried the registry cures, expensive but no luck.
I have no sound from either speakers or headphones. With the exception of a barely perceptible peep in my head phones when I test the asterisk sound in the control panel. I’m running XP on a Toshiba satellite.
May 10th, 2008 23:09
I’m so pissed at this site. I downloaded it fooled into thinking it would work and all it has done it make it worse. Before it was only my internet but after downloading this program ALL sound on my computer has ceased. I love music and cannot live without it and I’m so mad your program has affected my itunes,windows media player etc. I don’t know if this has happened to anyone else but if it has is there any way to fix it?
March 22nd, 2008 16:00
[...] n game controller ga.. ? kalo detek berati itu ga rosak .. coba pakek cara dari digit life ini … Fix Windows No System Sound and Audio Problem My Digital Life Radeon 9700 [...]
March 7th, 2008 00:36
Thank you very much for the help and advice,now got sound back after hours of frustration.A life saver
March 5th, 2008 09:53
Thanks! That worked. Been struggling with this problem for a few days now.
February 28th, 2008 01:36
THANKS FOR THE INSTRUCTIONS!!!They were a big help
February 27th, 2008 14:09
I have tried ALL things listed for the NO sound issue. I have a Dell with Vista Home and cannot watch ANY videos (i.e. youtube or her any flash media). I downloaded countless programs and uninstalled those that havent worked. I did the K-lite and the wavenmapper (which I already had – and then redid “just in case”) and the fixit program for no sound suggested on the other blog site (My Digital Life). STILL nothing! Any suggestions now?
February 25th, 2008 12:23
I have the same problem as LesleyG.
February 5th, 2008 12:05
Thank you so MUCH! everything else i tried failed..util i got here..thanks a bunch!
January 28th, 2008 09:35
I still have a problem, everything seems to be working fine untill I reach the Codec Tweak Tool window. There is no [Registry] Fix non-working system sound anywhere in the window, and I don’t know why…..help?
January 18th, 2008 05:32
Thank you so much!!!!!!! I was beginning to pull my hair out, after several days of trying to fix this prob. I had even called the makers of my notebook, and they were the ones to direct me to this site. So needless to say this prob. has many a pep befuddled.
January 15th, 2008 00:50
thankssssss
January 14th, 2008 14:04
THANK YOU! I also had “jpui”s situation where says no problem detected, but I think it fixed it when it was installing, because when I closed the program everything was good to go! While K-lite was installing it told me it found a problem and asked if you want to fix it, that’s when I think it did its magic.
January 13th, 2008 13:06
I would like to mention about this post as the same way as what Robert did.
Hey, I am working as a computer tech since 1983 on S/W, H/W, Network, Integration, Service… almost on everything.
But I’ve been strugling to fix “no system sound” problem since last August. I did uninstall and reinstall codec’s reinstall Windows OS and put a new sound card with new driver as well… Still no change…. -.-
Finally I found this post today,,, followed the directions as above and everything back to normal!!!
Thanks again guy, Happy new year 2008!!!
January 9th, 2008 23:22
Absolutely Great!
The ONLY fix found by this 25 year computer guy. Trust me I’m not a novice. I had installed so many power user video and audio codecs though the years I cant count them all.
If you are afflicted by the “No System Sound” issue, you know how annoying it can be.
Whoever wrote this product took a great deal of time and effort to find conflicting issues that only someone who works with this a great deal would know.
Please accept my heart felt thanks for this post.
If this doesn’t fix your problem just keep looking, that’s all you can do. But, I would bet a dollar to a doughnut that it’s not a driver problem if it doesn’t fix it.
Best Regards
RobertM
Orlando,FL
December 28th, 2007 12:12
This does not work.. I get “No problem detected” and nothing gets fixed.
August 15th, 2007 16:36
[...] out also K-Lite Codec Tool no system sound fix if you get no sound from Windows and Flash. Get help or contribute tips or tricks at My Digital [...]