Repair and Reset Windows Vista TCP/IP Winsock Catalog Corruption Windows Vistaの修復、およびリセットするTCP / IPのWinsockカタログが破損
TCP/IP stack Winsock settings in Windows Vista may get corrupted, causing errors and problems with Internet connectivity. TCP / IPスタックのWinsockの設定をWindows Vistaの5月に破損が、インターネットの接続を引き起こしエラーや問題が発生します。 Corrupt Winsock or Windows sockets configuration can be due to a lot of reasons such as installation of a networking software, or due to virus, trojan or malware infection, or sometime even due to disinfection of spyware by security software.壊れてWinsockまたはWindowsソケット構成のためにできる上の理由から、多くのネットワーキングソフトウェアなどのインストールをするか、またはのためにウイルス、トロイの木馬やマルウェアの感染症か、またはいつか消毒のためにも、スパイウェアをセキュリティソフトウェアです。
When Winsock corrupts, the networking errors that you may face include unable to surf the Internet with “Page cannot be displayed” error message in Internet Explorer or AOL even though the DSL/ADSL/cable Internet connection is connected. Winsockの破損時に、顔のネットワーキングのエラーが発生することはできないことがありますが、インターネットをサーフ"ページを表示できません"というエラーメッセージが表示されるInternet ExplorerまたはAOLのにもかかわらず、 DSLモデム/ adsl /ケーブルインターネット接続がインターネットに接続します。 Sometimes, Windows Firewall/Internet Connection Sharing (ICS) service is terminated as well.ときには、 Windowsファイアウォール/インターネット接続の共有( ICS )サービスが終了されます。
To repair and reset the Windows Vistaを修復すると、 Windows Vistaのリセット
- Click on Start button.スタート]ボタンをクリックしてボタンをクリックします。
- Type Cmd in the Start Search text box. cmdと入力し、 [スタート]テキストボックスに検索します。
- Press Ctrl-Shift-Enter keyboard shortcut to run Command Prompt as Administrator. Ctrlキーを入力しシフトキーボードショートカットを実行するコマンドプロンプトで管理者としてします。 Allow elevation request.昇格の要求を許可します。
- Type netsh winsock reset in the Command Prompt shell, and then press the Enter key. Winsockのタイプnetshコマンドプロンプトでリセットされるシェル、と入力し、 Enterキーを押します。
- Restart the computer.コンピュータを再起動します。
What netsh winsock reset command does are it resets Winsock Catalog to a clean state or default configuration. netshコマンドをリセットする機能はどのようなことのWinsock Winsockカタログをクリーンな状態にリセットやデフォルトの設定です。 It removes all Winsock LSP (Layered Service Providers) previously installed, including the potential malfunctioned LSP that causes loss of network packets transmission failure.すべてのWinsockのないことを削除する(層状サービスプロバイダー) 、以前は次のインストールされると、 malfunctionedない可能性を含むネットワークパケット伝送の損失が原因でエラーが発生します。 So all previously-installed LSPs must be reinstalled.以前にインストールするため、すべてのlsps再インストールしなければなりません。 This command does not affect Winsock Name Space Provider entries.このコマンドには影響しませんWinsockのプロバイダの名前空間のエントリです。
Note: To check which LSPs installed on your Vista system, use netsh winsock show catalog command.注: lspsを確認するにはVistaのシステムにインストールされて使うと、 Winsockの詳細カタログnetshコマンドを実行します。
It’s also possible toすることもできます。 reset TCP/IP Internet Protocol stackリセットTCP / IPのインターネットプロトコルスタック .です。
IMPORTANT : This is a machine translated page which is provided "as is" without warranty. 重要 :これは、機械翻訳ページで提供"現状有姿"を保証します。 Machine translation may be difficult to understand.機械翻訳を理解するのは難しいかもしれません。 Please refer toを参照してください original English articleオリジナルの英語記事索引 whenever possible.いつ可能です。
Share and contribute or get technical support and help atを共有して貢献や技術サポートとヘルプを得る My Digital Life Forums 私のデジタルライフフォーラム .です。
Related Articles関連記事
- Clear, Delete and Refresh ARP Cache Entry明確に、 ARPキャッシュエントリを削除してリフレッシュ
- Reinstall and Reset TCP/IP (Internet Protocol) in Windows Vista, 2003 and XP再インストールし、リセットのTCP / IP (インターネットプロトコル) Windows Vistaでは、 2003年およびXP
- Download BITS Repair Tool (KB940520) for Windows Vista for x64-based Systemsダウンロードビット修復ツール( kb940520 )を見るWindows Vista for x64ベースのシステム
- Vista Uninstall, Change or Repair Programs and Updates Button Disappear and Not Showing Vistaのアンインストール、または修復プログラムと更新プログラムの変更ボタンをクリック消えると表示されていません
- Autoplay Repair Wizard Free Download自動修復ウィザードを無料でダウンロードできます
- JDP Software-StompSoft Registry Repair Review by ComputerAct!ve jdpソフトウェアstompsoftレジストリの修復した日をcomputeract ! ve
- TCPIP.SYS Driver Patcher CrackTcpip.sys for Vista SP1 v.744 and 6001.18000 (RTM) Tcpip.sysでドライバcracktcpip.sys for VistaはSP1を繕うv.744と6001.18000 ( RTM版以降)
- Easy Method to ReArm and Reset Windows Vista Activation for Unlimited Times with Vista Reset簡単なメソッドを再武装し、リセットWindows Vistaの活性化を無制限の倍にVistaのリセット
- Fix, Repair and Reset Incorrect or Invalid Unread Mail Count in Windows XP Welcome Screen修正、修復、およびリセット正しくないか、または無効な未読メール数では、 Windows XPへようこそ画面
- TCP/IP Has Reached the Security Limit Imposed on the Number of Concurrent TCP Connect Attempts Error on Windows Vista TCP / IPの限界に達して課税され、安全保障のTCP同時接続数のエラーが発生するWindows Vistaの試み















June 19th, 2007 02:43 2007年6月19日02:43
I’ve had the same problem with XP Pro.私は、同じ問題がXPのプロです。 And in this particular case, this fix didn’t work.そしてこの特定の場合は、この修正プログラムは動作しません。
To solve the problem, I’ve used WinSockFix which did the work well.この問題を解決するために、私はその仕事をwinsockfix使われています。
June 19th, 2007 10:38 2007年6月19日10:38
WinSockFix helped me in XP Pro as well when I was trying to set up home networking. winsockfix助けてくれたのXPのプロとしてよくしようとしてセットアップするときに私はホームネットワーキングです。 (There are a few others I saw at snapfiles.com as well.) (その他は、いくつかのsnapfiles.comを見たのです。 )
June 19th, 2007 22:15 2007年6月19日22:15
[...] access or connect to Internet or network problem in Windows Vista, Windows 2003 and Windows XP, and repair WinSock settings plus workaround for Vista IE7 strange no connection problem do not save your from Internet woes, [...] [...]アクセスしたり、インターネットやネットワークの問題に接続してWindows Vistaでは、 Windows 2003およびWindows XP 、および修復Winsockの設定をプラスie7 for Vistaは奇妙な回避策の接続に問題はありませんから保存してインターネットの悲哀、 [...]
June 20th, 2007 15:45 2007年6月20日15:45
[...] ARP (Address Resolution Protocol is the standard method for finding a host’s hardware address when only its network layer address is known. In other word, in IPv4 and Ethernet network environment, Windows operating system uses ARP to translate IP addresses to Ethernet MAC addresses. However, Microsoft Windows ARP cache will occasionally become corrupt and need to be cleared and deleted so that the cache can be refreshed. When you haven’t problem connecting to Internet where connections to websites or web pages will time out or fail, and unable to surf or browse the Internet pages, the error may because also of ARP cache corruption, other than TCP/IP corruption or Winsock error. [...] [...]のARP (アドレス解決プロトコルは、標準的な方法を見つけるときにのみ、ホストのハードウェアアドレスのネットワーク層のアドレスは知られている。 、他の言葉は、 IPv4とEthernetネットワーク環境では、ウィンドウズオペレーティングシステムを使用してのARPを翻訳するのIPアドレスをイーサネットMACアドレスを入力します。ただし、 Microsoft Windows ARPキャッシュが破損しており、時折になると削除をクリアする必要がありますように、キャッシュリフレッシュできる。際の問題をお持ちでない方に接続しての接続をインターネット上のウェブサイトやウェブページにはタイムアウトまたは失敗し、サーフできませんでしたまたは閲覧し、インターネットのページを、 5月のため、エラーが発生ARPキャッシュの破損も、 TCP / IP以外の破損またはWinsockエラーが発生します。 [...]
April 9th, 2008 21:36 2008年4月9日21:36
[...] suggest that Microsoft get off its butt and do something about all the connection issues. [...]下車示唆してマイクロソフトの尻と何かについてのすべての接続に関する問題です。 Perhaps something is corrupt and the OS can’t detect the corruption.おそらく、何かが破損しており、腐敗のOSを検出することはできません。 I’ve found one more solution that I will try [...]私は1つの解決策を発見しようと私は[...]
May 27th, 2008 00:07 2008年5月27日00:07
this one worked like a charm, was almost set on doing a reinstall.この作業のように1つの魅力、再インストールはほぼ設定しているのです。 Did these steps and the laptop is working just great.参考作業の手順を実行しますとノートパソコンは上出来だね。
Thank You Thank You Thank Youいただきありがとうございますいただきありがとうございますいただきありがとうございます
June 9th, 2008 19:07 2008年6月9日19:07
[...] ICS_IPV6 failed to configure IPv6 stack. IPv6スタックを構成する[...] ics_ipv6に失敗しました。 Hast Du mal den IP-Stack repariert??? hastデュmalデンのIP -スタックrepariertですか?ですか?ですか? Schau mal unter: Repair and Reset Windows Vista TCP/IP Winsock Catalog Corruption schau malウンター: Windows Vistaの修復、およびリセットするTCP / IPのWinsockカタログが破損
June 10th, 2008 19:17 2008年6月10日19:17
netsh winsock reset command just saved me from a horrible week of reinstalling my system! netsh Winsockのリセットコマンドだけを保存恐ろしい週間以内に私からの私のシステムを再インストールする! ThanX!のthanx !
June 22nd, 2008 01:45 2008年6月22日01:45
[...] You can also try flushing DNS on Vista too. [...]フラッシングにDNSをしようとすることもできます。ビスタが判明しました。 There seems to be two things I can do, as instructed here and here.と思われる2つのことができるかどうか、こことここに指示します。 Which one should I do?これ1つすればよいですか? Another important question: After doing any of these things will [...]もう一つの重要な質問:した後のいずれかのこと物事は[...]
July 1st, 2008 16:25 2008年7月1日16:25
Yeah!うん! That did it for me.を参考してもらえます。 My son’s computer was running dead-dog slow and had a broken network connection and no readable Event Log.私の息子のコンピュータが実行されて死んだ犬はゆっくりと壊れてネットワーク接続を読めるのイベントログに記録します。 I disabled a bunch of junk in msconfig and ran this command with elevated privileges and all is well.私無効になって一束の迷惑にこのコマンドを実行でMsconfigと、特権の昇格が、すべてはよくします。
August 14th, 2008 01:22 2008年8月14日01:22
netsh winsock reset !!! netsh Winsockのリセットされました!
Thank you !!いただきありがとうございます!
i was very close to re-installing the OS私は非常に近いのOSを再インストールする
August 15th, 2008 17:48 2008年8月15日17:48
If that didn’t work, try to uninstall the network card leaving the drivers in system, this will reset all the network settings, after that scan for new hardware, system will found network card , then just to configure the ip etc仕事されなかった場合、ネットワークカードをアンインストールするに残して、ドライバ、システムは、この値はすべてのネットワーク設定をリセットする、新しいハードウェアをスキャンした後に、システムはネットワークカードが見つかりました、その後のIP等を設定するだけ