Uninstall or Remove Windows Vista Validation Update (KB929391) and Workarounds卸載或刪除Windows Vista驗證更新（ kb929391 ）和替代

Windows Vista Validation Update ( Windows Vista驗證更新（ KB929391 kb929391 ) has just been ）剛剛 released and deployed發布和部署 to Vista computer that are what called by Microsoft as “到Vista的電腦是什麼所謂的微軟“ frankenbuild ” system that use the “系統的使用 workaround of mixing files from RC and RTM build to activate其他可行的混合文件從區局和建設的RTM激活 the Windows Vista. Windows Vista的。 As there is no official retail or OEM version of Windows Vista on sale in market yet, so practically all Vista installation by personal or home users is likely to be activated with pirate or crack methods.由於沒有正式的零售或OEM版本的Windows Vista發售，但在市場，所以幾乎所有的Vista安裝由個人或家庭用戶很可能會被激活，與海盜或裂紋的方法。 Your Vista will be de-activated after this update and with Aero feature disabled.您的Vista將德激活後，此更新並與航空功能禁用。

Unactivated Windows Vista will go into unactivated Windows Vista將進入 reduced functionality mode縮減功能模式 once the activation grace period expired, where Vista will provide only limited usablity.一旦激活的寬限期屆滿， Vista將只提供有限的usablity 。 So if you want to continue using Windows Vista at least until theoretical expiry date of RC1 or RC2 product key in mid 2007, there a few methods that you can try, and should works on all editions of Vista (ultimate, business, enterprise, home premium and etc).所以，如果你想繼續使用Windows Vista ，至少到理論的屆滿日期RC1或RC2測試版的產品密鑰在2007年年中，有幾個方法，您可以嘗試，並應工程對所有版本的Vista版（最終，商業，企業，家庭保費等） 。

1. Do not install KB929391 Windows Vista Validation Update.不要安裝kb929391 Windows Vista驗證更新。 You can turn off Automatic Updates, or at least set it not to automatically install critical updates for you.您可以關閉自動更新，或者至少是它設定不自動安裝關鍵更新為您。 But if you need to read this article, most likely you have installed it (or Microsoft has pushed it to you), so useless.但如果您需要閱讀此文章，最有可能是您已經安裝了它（或Microsoft已推給你的） ，所以沒有用處。
2. Reinstall Windows Vista.重新安裝的Windows Vista 。 Straight forward method, format your hard drive and install fresh Windows Vista again, activate it with various直線前進的方法，格式，您的硬盤驅動器和安裝新的Windows Vista的再次激活它與各 crack打擊 or或 workaround其他可行方案 , and then remember the point 1 above. ，然後記得第1點以上。
3. If you have made a ghost image of your hard drive which Vista is installed, roll back to the previous state of Vista by restoring the image.如果您已作出了鬼的形象，您的硬盤驅動器，其中Vista安裝，回滾到以前的狀態的Vista恢復形象。 Also remember point 1 above.還記得第1點以上。
4. If you have made a CompletePC Backup, boot from Windows Vista DVD, and recover your system by restoring the backup.如果您已作出了completepc備份，啟動從Windows Vista的DVD ，並回复您的系統恢復備份。 Remember point 1 above too.記得第1點以上。
5. ronie reported the following steps will work to remove the KB929391 update:報告下列步驟將工作，以消除kb929391更新：
   1. Boot from your Vista installation DVD.開機從您的Vista安裝DVD上。
   2. Select “Repair your computer”.選擇“修復您的電腦” 。
   3. Choose “System Restore” and pick a restore point that has been created before the validation update (KB929391) was installed.選擇“系統還原” ，並選擇一個還原點已創建前驗證更新（ kb929391 ）的安裝。
   4. As usual, remember point 1 above.一如以往，記得第1點以上。
6. Try to disable, uninstall or remove Windows Vista Validation Update (KB929391) in the hope to undone the ‘damage’ by using following steps.嘗試禁用，卸載或刪除Windows Vista驗證更新（ kb929391 ）在希望有所不為'損害'使用下列步驟。 You will need the RC1 or RC2 files of tokens.dat and CPP product key (both is the same as what you used to crack Vista activation previously to make Vista validated and genuine. If you lost the files, download it您將需要RC1或RC2中的檔案tokens.dat和CPP產品密鑰（均是一樣的是什麼，你用來打擊Vista激活以前，使Vista的驗證和真正的，如果你失去了檔案，下載 here這裡 ) plus Windows Vista DVD. ） ，另加從Windows Vista DVD 。 You should backup your important files before trying this.你應該備份您的重要文件，然後嘗試這一點。
   1. Reboot Windows Vista, and boot into Safe Mode.重新啟動的Windows Vista ，並啟動到安全模式。
   2. Launch Windows Explorer, go to Folder Options and check (tick or select) “Show Hidden Files” and “Show protected system files” options.推出Windows檔案總管，去文件夾選項，並檢查（剔或選擇） “顯示隱藏的文件”和“顯示，受保護的系統文件”選項。 Then click OK.然後單擊確定。
   3. Zap the WPA encrypted store by deleting the following files (hidden by default unless you show hidden file as instructed above): zap的WPA加密存儲刪去下列文件（默認為隱藏，除非您顯示隱藏文件的指示，以上） ：

      “C:\Windows\System32\7B296FB0-376B-497e-B012-9C450E1B7327-的“ C ： \的Windows \ system32 \ 7b296fb0 - 376b - 497e - b012 - 9c450e1b7327 -
      2P-0.C7483456-A289-439d-8115-601632D005A0″ 2名專業人員- 0.c7483456 - a289 - 439d - 8115 - 601632d005a0 “
      “C:\Windows\System32\7B296FB0-376B-497e-B012-9C450E1B7327-的“ C ： \的Windows \ system32 \ 7b296fb0 - 376b - 497e - b012 - 9c450e1b7327 -
      2P-1.C7483456-A289-439d-8115-601632D005A0″ 2名專業人員- 1.c7483456 - a289 - 439d - 8115 - 601632d005a0 “

   4. Uninstall the WGA (Windows Vista Genuine Advantage) update by execute or run the following command:卸載的WGA （ Windows Vista的真正優勢）更新由執行或執行下列命令：

      regsvr32 /uc:\windows\system32\LegitCheckControl.dll regsvr32 /市政局： \的Windows \ system32 \ legitcheckcontrol.dll

   5. Reset the Vista Software Licensing tokens file by copying back the RC1 or RC2 tokens.dat to重置Vista的軟件許可憑證文件複製回RC1或RC2中，以tokens.dat

      “C:\Windows\ServiceProfiles\NetworkService\AppData\的“ C ： \的Windows \ serviceprofiles \ networkservice \應用程序數據\
      Roaming\Microsoft\SoftwareLicensing\”漫遊\微軟\ softwarelicensing \ “

      Replace the original tokens.dat.取代原有的tokens.dat 。

   6. The following step is to remove the Windows Product Activation (WPA) data from the registry.接下來的步驟是要移除Windows產品激活（ WPA ）的數據從註冊表中。 It’s impossible to do this at normal Vista installation bootup, so restart the computer and boot with Windows Vista DVD.它的不可能做到，這在正常的Vista安裝啟動，因此，重新啟動電腦，並啟動與Windows Vista的DVD 。 Choose to “Repair my Computer” and then select your appropriate Vista installation.選擇“修復我的電腦” ，然後選擇您適當的Vista安裝。
   7. Then select “Command Prompt”, and at command prompt window, type “regedit” (without quotes to run registry editor.然後選擇“命令提示符” ，並在命令提示符窗口，鍵入“ regedit ” （不含引號運行註冊表編輯器。
   8. Select HKEY_LOCAL_MACHINE registry branch, and then click on File -> Load Hive.選擇HKEY_LOCAL_MACHINE註冊表分支，然後單擊關於檔案-> “加載配置單元。
   9. Navigate to C:\Windows\System32\config and choose the SYSTEM hive.瀏覽到C ： \的Windows \ system32 \配置和選擇的系統配置單元。 Give it key name of “temp”.給它的關鍵的名稱“氣溫” 。
   10. Locate HKEY_LOCAL_MACHINE\temp\WPA\ registry branch and then delete and remove every registry subkeys or child nodes under it.找到hkey_local_machine \氣溫\ WPA的\註冊表分支，然後刪除，並刪除每一個註冊表子項或子節點下。 Leave only WPA that is blank.只有離開的WPA是空白。 If you already deleted the WPA key, re-create it by right click on HKEY_LOCAL_MACHINE\temp\, and choose New -> Key.如果您已經刪除了WPA的關鍵，重新創建它由上按一下滑鼠右鍵hkey_local_machine \氣溫\ ，並選擇新-> “的關鍵。
   11. Select HKEY_LOCAL_MACHINE\temp\ and then click on File -> Unload Hive.選擇hkey_local_machine \氣溫\ ，然後點擊文件-> “卸載配置單元。
   12. Exit from registry editor, exit from command prompt, and then restart the computer.退出註冊表編輯器，退出命令提示符，然後重新啟動計算機。
   13. After booting up normally into Windows Vista, the Vista will be in RFM mode (reduced functionality mode) with message of “Your copy of windows is not genuine.”開機之後進入正常的Windows Vista ， Vista將在的RFM模式（縮減功能模式）與訊息“您的Windows副本不是正版” 。
   14. Run slui.exe.運行slui.exe 。
   15. Enter any CPP product key (serial key issued during Release Candidate 1 or RC2).進入任何柬埔寨人民黨的產品金鑰（串行的關鍵期間印發的候選版本1或RC2測試版） 。
   16. Windows Vista should be activated as genuine. Windows Vista中，應作為真正的激活。
   17. Log off (logout) and log on (login) again to reactivate Windows Aero interface.註銷（註銷）並登錄（登錄）再次重新啟動Windows Aero界面。
   18. You can now run windows update, by remember point 1 above, uncheck the KB929391 WGA update and if you don’t want to see it forever, hide it.現在，您可以運行Windows Update ，記得第1點以上的，取消勾選kb929391的WGA更新，如果你不希望看到它，永遠隱藏它。
7. Simplified and shorter method to recover from the KB929391 Vista Validation Tool that based on the above steps, as found out by簡化和較短的方法，以收回從kb929391 Vista驗證工具，基於上述步驟，找出 joysa . 。 Just execute step 1 - 7 and follow by step 12 - 18, and you’re will be rescued from Vista RFM hell.剛剛執行步驟1 -7和後續步1 2- 18 ，您將獲救從V i sta中的R F M地獄。
8. Another way to get rid of KB929391 Windows Vista Validation Tool, very similar to step above but requires a new CPP product key:另一種方式擺脫kb929391 Windows Vista的驗證工具，非常類似上述步驟，但需要一個新刑事訴訟法的產品金鑰：
   1. Create a new Windows Live account.創建一個新的Windows Live帳戶。
   2. Obtain a new Windows Vista Release Candidate (RC1) beta product key from獲取一個新的Windows Vista的候選版本（ RC1的）測試版產品的關鍵，從 here這裡 . 。 You can also try out other product keys, if you have one.您也可以嘗試其他產品金鑰，如果你有一。 The existing RC1 beta product key used to activate Windows Vista is may has been blacklisted and banned by Microsoft already.現有的RC1的測試版產品密鑰用來激活Windows Vista是可能已被列入黑名單，並禁止微軟已經。 Once generate and obtain the new product key, note it down.一旦產生，並取得新產品的關鍵，請注意下來。
   3. Restart computer and boot into Safe Mode.重新啟動計算機，並啟動到安全模式。
   4. Launch Windows Explorer, go to Folder Options and check (tick or select) “View Hidden Files”.推出Windows檔案總管，去文件夾選項，並檢查（剔或選擇） “查看隱藏文件” 。 Then click OK.然後單擊確定。
   5. Ensure that you have full administrative access or full administrator rights.確保您有完整的管理權限或完全管理員權限。 Turn off UAC is needed.關閉的UAC是必要的。
   6. Zap the WPA encrypted store by deleting the following files (hidden by default unless you show hidden file as instructed above): zap的WPA加密存儲刪去下列文件（默認為隱藏，除非您顯示隱藏文件的指示，以上） ：

      “C:\Windows\System32\7B296FB0-376B-497e-B012-9C450E1B7327-的“ C ： \的Windows \ system32 \ 7b296fb0 - 376b - 497e - b012 - 9c450e1b7327 -
      2P-0.C7483456-A289-439d-8115-601632D005A0″ 2名專業人員- 0.c7483456 - a289 - 439d - 8115 - 601632d005a0 “
      “C:\Windows\System32\7B296FB0-376B-497e-B012-9C450E1B7327-的“ C ： \的Windows \ system32 \ 7b296fb0 - 376b - 497e - b012 - 9c450e1b7327 -
      2P-1.C7483456-A289-439d-8115-601632D005A0″ 2名專業人員- 1.c7483456 - a289 - 439d - 8115 - 601632d005a0 “

   7. Reboot the computer and log on to Windows Vista normally.重新啟動計算機並登錄到Windows Vista的正常進行。
   8. After you logged in, you will likely in RFM mode, with message of “There has been a change to your Windows Activation Process”, and requires you to activate Vista again or restart, with 2 options of either Validate Windows Online or Close.之後，您是否登錄，您可能會在的RFM模式，與信息“已改變您的Windows激活過程” ，並要求你要激活Vista的再次或重新啟動， 2選擇要么驗證Windows在線或關閉。
   9. Click on “Validate Windows Online”, system will still prompt you with error message “Your copy of Windows is not genuine”, and return to the previous screen with 2 options again.點擊“驗證Windows在線” ，系統仍然會提示你錯誤訊息“您的Windows副本不是正版” ，並返回到先前的屏幕與2選項。
   10. Manually restart the computer.手動重新啟動計算機。
   11. After the reboot (and login to Vista if applicable), system should prompt “There has been a change in the Windows product key”, and pop up a window for user to type in Windows Vista product key.重新開機之後， （和登錄到Vista如果適用的話） ，系統應提示“有一個變化，在Windows產品密鑰” ，並彈出一個窗口，為用戶類型，在Windows Vista產品密鑰。
   12. Enter the new Vista RC1 product key.進入新的Vista RC1的產品密鑰。
   13. The Windows Vista Ultimate edition should be activated again. Windows Vista的最終版，應再次激活。
   14. Remember point 1 above, turn off Automatic Updates now, and check out what is the updates before installing.記得第1點以上，關閉自動更新，現在，並檢查出是什麼更新，然後再安裝。 Note that this method doesn’t remove or uninstall KB929391, but should works to make your Vista as genuine again.請注意，此方法不刪除或卸載kb929391 ，但應工程，使您的Vista中真正的一次。

Note: If you go to Genuine Microsoft Software website for validation, you will get validation results of “This copy of Windows does not pass genuine validation.注意：如果你到正版Microsoft軟件的網站進行驗證，你會得到驗證的結果， “這的Windows副本不通過正版驗證。 The Windows product key installed on this computer has been blocked.” Windows產品密鑰此計算機上安裝了已被封鎖“ 。

You can now also你現在也可以 permanently activate your Windows Vista with StopTimer.sys hack永久激活您的Windows Vista與stoptimer.sys哈克 . 。

IMPORTANT : This is a machine translated page which is provided "as is" without warranty. 重要說明 ：這是一個機器翻譯網頁是“按原樣”提供的擔保。 Machine translation may be difficult to understand.機器翻譯可能很難理解。 Please refer to請參閱 original English article英文原版的文章 whenever possible.只要有可能。

Share and contribute or get technical support and help at分享和貢獻，或取得技術的支持和幫助，在 My Digital Life Forums 我的數字生活論壇 . 。

Related Articles相關文章

• Windows Vista Validation Update (KB929391) Released Windows Vista驗證更新（ kb929391 ）公佈
• Windows Vista Activation Activators and Cracks AIO (All-in-One) Windows Vista激活激活和裂縫扣押入息令（所有-在-一）
• KB931573 May Invalidate Windows Vista Activate Crack with Solution kb931573可能無效的Windows Vista激活裂紋與解決方案
• Windows Vista Genuine Advantage to Start Validating Windows Vista的真正優勢，開始驗證
• Activate Windows Vista RTM 6000 by Phone Activation with CPP Product Key from RC1 or Beta Release激活Windows Vista的RTM 6000電話激活與柬埔寨人民黨的產品金鑰從RC1或試用版
• Download Windows Vista RC1 Direct from Microsoft and Product Key Crack下載Windows Vista RC1的直接來自微軟和產品密鑰裂紋
• Windows Vista Ultimate Activation Crack by KMS Server with Frankenbuild Files Patch Windows Vista旗艦版激活裂紋的KMS服務器與frankenbuild文件修補程序
• Windows Genuine Advantage Validation Tool v1.7.69.2 for Vista SP1 and XP Cracked by Hacker Windows Genuine Advantage驗證工具v1.7.69.2為Vista的SP1和XP中破獲的黑客
• How to Uninstall Windows Internet Explorer 8 (IE8) in Vista如何卸載Windows Internet Explorer第8條第（ ie8 ）在Vista
• Cracked LegitCheckControl.dll 1.7.59.0 for WGA Validation by ETH0破獲legitcheckcontrol.dll 1.7.59.0為WGA驗證所為eth0

This entry was posted on Saturday, December 16th, 2006 at 4:42 pm and is filed under 此項目被張貼在週六， 2006年12月16日在下午4時42分，並提交下 Operating Systems 操作系統 . 。 You can follow any responses to this entry through the 您可以按照任何的反應，此項目通過 RSS 2.0 2.0 feed. 餵養。 You can 您可以 leave a response 留下的回應 , or ，或 trackback Trackback跟踪 from your own site. 從你自己的網站。